Journal Papers:

  1. C. Lai, G. Feng, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, “Genetic Algorithm based Current Optimization for Torque Ripple Reduction of Interior PMSMs,” accepted for publication in the  IEEE Transactions on Industry Applications, Oct. 2016.
  2. C. Lai, G. Feng, K. Mukherjee, V. Loukanov and N. C. Kar, “Torque Ripple Modeling and Minimization for Interior PMSM Considering Magnetic Saturation,” accepted for publication in the IEEE Transactions on Power Electronics, 2016.
  3. G. Feng, C. Lai, and N. C. Kar, “An Analytical Solution to Optimal Stator Current Design for PMSM Torque Ripple Minimization with Minimal Machine Losses,” accepted for publication in the IEEE Transactions on Industrial Electronics, 2016.
  4. C. Lai, G. Feng, K. Mukherjee, and N. C. Kar, “Investigations of the Influence of PMSM Parameter Variations in Optimal Stator Current Design for Torque Ripple Minimization,” accepted for publication in the IEEE Transactions on Energy Conversion, Oct. 2016.
  5. C. Lai, G. Feng, K. Mukherjee, V. Loukanov, and N. C. Kar, “Torque Ripple Minimization for Interior PMSM with Consideration of Magnetic Saturation Incorporating On-line Parameter Identification,” accepted for publication in the IEEE Transactions on Magnetics, 2016.
  6. G. Feng, C. Lai, K. Mukherjee, and N. C. Kar, “Online PMSM Magnet Flux Estimation for Rotor Magnet Condition Monitoring Using Measured Speed Harmonics,” accepted for publication in the IEEE Transactions on Industry Applications, 2016.
  7. A. Mollaeian, E. Ghosh, H. Dhulipati, J. Tjong, and N. C. Kar, “A 3-D Sub-Domain Analytical Model to Calculate Magnetic Flux Density in Induction Machines with Semi-Closed Slots under No-Load Condition,” accepted for publication in the IEEE Transactions on Magnetics, 2016.
  8. F. Ahmed and N. C. Kar, “Analysis of End-winding Thermal Effects in a Totally Enclosed Fan Cooled Induction Motor with Die Cast Copper Rotor,” accepted for publication in the IEEE Transactions on Industry Applications.
  9. E. Zhu, V. Hu, and N. C. Kar, “Torque Ripple Based Interior Permanent Magnet Synchronous Machine Rotor Demagnetization Fault Detection and Current Regulation,” accepted for publication in the IEEE Transactions on Industry Applications.
  10. G. Feng, C. Lai, and N. C. Kar, “A Closed-Loop Fuzzy Logic based Current Controller for PMSM Torque Ripple Minimization Using the Magnitude of Speed Harmonic as the Feedback Control Signal,” accepted for publication in the IEEE Transactions on Industrial Electronics, 2016.
  11. G. Feng, C. Lai, and N. C. Kar, “Particle Filter based Magnet Flux Linkage Estimation for PMSM Magnet Condition Monitoring Using Harmonics in Machine Speed,” accepted for publication in the IEEE Transactions on Industrial Informatics, 2016
  12. X. Lu, K. L. V. Iyer, C. Lai, K. Mukherjee, and N. C. Kar, “Design and Testing of a Multi-port Sustainable DC Fast Charging System for EV/PHEV,” Journal of Electric Power Components and Systems.
  13. X. Lu, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, “Investigation of Integrated Charging and Discharging Incorporating Interior Permanent Magnet Machine with Damper Bars for Electric Vehicles,” IEEE Transactions on Energy Conversion, 31(1), 260‐269, 2016, March.
  14. E. Ghosh, A. Mollaeian, W. Hu, and N. C. Kar, “A Novel Control Strategy for On‐line Harmonic Compensation in Parametrically Unbalanced Induction Motor,” IEEE Transactions on Magnetics, vol. 52, no. 7, 2016.
  15. A. Balamurali, C. Lai, A. Mollaeian, V. Loukanov, and N. C. Kar, “Analytical Investigation of Magnet Eddy Current Losses in Interior Permanent Magnet Motor Using Modified Winding Function Theory Accounting for Pulse Width Modulation Harmonics,” IEEE Transactions on Magnetics, vol. 52, no. 7, 2016.
  16. G. Feng, C. Lai, and N. C. Kar, “A Novel Current Injection-Based Online Parameter Estimation Method for PMSMs Considering Magnetic Saturation,” IEEE Transactions on Magnetics, vol. 52, no. 7, pp. 1-4, 2016.
  17. G. Feng, C. Lai, K. Mukherjee, and N. C. Kar, “Current Injection-Based Online Parameter and VSI Nonlinearity Estimation for PMSM Drives Using Current and Voltage DC Components,” IEEE Transactions on Transportation Electrification, vol. 2, no. 2, pp. 119-128, 2016.
  18. G. Feng, C. Lai, and N. C. Kar, “Expectation Maximization Particle Filter and Kalman Filter based Permanent Magnet Temperature Estimation for PMSM Condition Monitoring using High-Frequency Signal Injection,” IEEE Transactions on Industrial Informatics, in press, 2016

 

Conference Papers:

  1. M. Mehdi, Y. He, E. J. Hilinski, R. Riahi, N. C. Kar, and A. Edrisy, “The Effect of Reduction Rate and low Temperature Annealing on Texture Evolution of Non-oriented Electrical Steel after Inclined Cold Rolling,” in Proc. of  the 28th Canadian Materials Science Conference, Hamilton, June 2016.
  2. M. Mehdi, Y. He, E. J. Hilinski, R. Riahi, N. C. Kar, and A. Edrisy, “The effect of Annealing Temperature on the Texture of Electrical Steel after Inclined Cold Rolling,” in Proc. of  the 28th Canadian Materials Science Conference, Hamilton, June 2016.
  3. A. Mollaeian, E. Ghosh, and N. C. Kar, “3-D Sub-domain Analytical Model to Calculate Magnetic Flux Density of Induction Machine with Semi-closed Slots under No-Load Condition,” in Proc. of  the IEEE Conference on Electromagnetic Field Computation, Florida, 2016.
  4. C. Lai, G. Feng, and N. C. Kar, “Torque Ripple Minimization for Interior PMSM with Consideration of Magnetic Saturation Incorporating On-line Parameter Identification,” in Proc. of  the IEEE Conference on Electromagnetic Field Computation, Florida, 2016.
  5. G. Feng, C. Lai, and N. C. Kar, “A Novel Saturated Inductance Estimation Approach for PMSM using Third Harmonic Voltage Injection,” in Proc. of  the IEEE Conference on Electromagnetic Field Computation, Florida, 2016.
  6. A. Balamurali, C. Lai, V. Loukanov, and N. C. Kar, “Modeling and Analysis of Carrier Harmonic based Eddy Current Losses in Interior Permanent Magnet Motors,” in Proc. of  the IEEE Conference on Electromagnetic Field Computation, Florida, 2016.
  7. E. Ghosh, F. Ahmed, A. Mollaeian, and N. C. Kar, “Online Parameter Estimation and Loss Calculation using Duplex Neural-Lumped Parameter Thermal Network for Faulty Induction Motor,” in Proc. of  the IEEE Conference on Electromagnetic Field Computation, Florida, 2016.
  8. H. Dhulipati, K. L. V. Iyer, S. Mukundan, K. Mukherjee, J. Tjong, and N. C. Kar, “Investigation of 6-Phase Surface PM Machines with Concentrated Windings for Reduction in Space Harmonics, Leakage Inductance and Magnet Loss in Direct-Drive EV,” in Proc. of  the IEEE International Conference on Electrical Machines, Switzerland, 2016.
  9. S. Mukundan, K. L. V. Iyer, H. Dhulipati, K. Mukherjee, J. Tjong, and N. C. Kar, “Response Surface Methodology based Optimization of Surface PM Machine Incorporating Stator Slotting and PM Sizing Effects to Extend the Operating Limits for Direct-drive EV Application,” in Proc. of  the IEEE International Conference on Electrical Machines, Switzerland, 2016.
  10. G. Feng, C. Lai, K. L. V. Iyer, and N. C. Kar, “Torque Ripple Modeling and Minimization for PMSM Drives with Consideration of Magnet Temperature Variation,” in Proc. of  the IEEE International Conference on Electrical Machines, Switzerland, 2016.
  11. K. L. V. Iyer, H. Dhulipati, S. Mukundan, K. Mukherjee, J. Tjong, and N. C. Kar, “Design Approach Incorporating MTPA and Winding Function Theories for On-board Direct-Drive Surface PM Machines with Concentrated Windings in EVs,” in Proc. of  the IEEE International Conference on Electrical Machines, Switzerland, 2016.
  12. A. Balamurali, C. Lai, G. Feng, V. Loukanov, and N. C. Kar, “Online Multi-Parameter Identification of Permanent Magnet Synchronous Motors in EV Application Considering Iron Losses,” in Proc. of  the IEEE International Conference on Electrical Machines, Switzerland, 2016.
  13. C. Lai, G. Feng, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, “Genetic Algorithm based Current Optimization for Torque Ripple Reduction of Interior PMSMs,” in Proc. of  the IEEE International Conference on Electrical Machines, Switzerland, 2016.
  14. A. Mollaeian, S. M. Sangdehi, A. Balamurali, G Feng, and N. C. Kar, “Reduction of Space Harmonics in Induction Machines Incorporating Rotor Bar Optimization through a Coupled IPSO and 3-D FEA Algorithm,” in Proc. of  the IEEE International Conference on Electrical Machines, Switzerland, 2016.
  15. E. Ghosh, A. Mollaeian, and N. C. Kar, “Intelligent Flux Prediction through Online Stator Inter-turn Fault Detection for Fault-tolerant Control of Induction Motor,” in Proc. of  the IEEE International Conference on Electrical Machines, Switzerland, 2016.
  16. K. L. V. Iyer, B. Minaker, K. Mukherjee, J. Tjong, and N. C. Kar, “On-board Direct-Drive Surface Permanent Magnet Synchronous Machine with Fractional-Slot Concentrated Windings for Electric Vehicles,” in Proc. of  the IEEE Canadian Conference on Electrical & Computer Engineering, Vancouver, Canada, 2016.
  17. F. Ahmed, E. Ghosh, and N. C. Kar, “Transient Thermal Analysis of a Copper Rotor Induction Motor using a Lumped Parameter Temperature Network Model,”in Proc. of  the IEEE Transportation Electrification Conference, Michigan, USA, 2016.
  18. M. Zhu, V. Hu, and N. C. Kar, “The SOH Estimation of LiFePO4 Battery Based on Internal Resistance with Grey Markov Chain,”in Proc. of  the IEEE Transportation Electrification Conference, Michigan, USA, 2016.
  19. K. L. V. Iyer, C. Lai, S. Mukundhan, H. Dhulipathi, K. Mukherjee, and N. C. Kar, “Investigation of Magnet Demagnetization and Losses in Interior and Surface PMSMs during Integrated Charging Operation in Electric Vehicles,” in Proc. of  the IEEE Intermag Conference, San Diego, USA, 2016.
  20. A. Mollaeian, M. Mousavi, A. Balamurali, J. Tjong, and N. C. Kar, “Optimal Design of Skewed Rotor Induction Machine for Space Harmonic Reduction Considering z-Axis Magnetic Flux Density Variation,” in Proc. of  the IEEE Intermag Conference, San Diego, USA, 2016.
  21. A. Labak, J. Tjong, and N. C. Kar, “Rapid Magnetic De-Fluxing Approach for a Novel ASRM Design with a Push-Pull Winding Arrangement,” in Proc. of  the  IEEE Intermag Conference, San Diego, USA, 2016.
  22. E. Ghosh, A. Mollaeian, V. Hu, and N. C. Kar, “A Novel Control Strategy for On-line Harmonic Compensation in Parametrically Unbalanced Induction Motor,” in Proc. of  the IEEE Intermag Conference, San Diego, USA, 2016.
  23. G. Feng, C. Lai, and N. C. Kar, “A Novel Current Injection Based On-line Parameter Estimation Method for PMSMs Considering Magnetic Saturation,” in Proc. of  the IEEE Intermag Conference, San Diego, USA, 2016.
  24. A. Balamurali, C. Lai, A. Mollaeian, V. Loukanov, and N. C. Kar, “Analytical Investigation of Magnet Eddy Current Losses in Interior Permanent Magnet Motor Using Modified Winding Function Theory Accounting for Pulse Width Modulation Harmonics,” in Proc. of  the IEEE Intermag Conference, San Diego, USA, 2016.