2017

2017

Journal Papers:

  1. K.L.V. Iyer, C. Lai, S. Mukundan, H. Dhulipati, K. Mukherjee, and N.C. Kar, “Investigation of Challenges in Interior and Surface Permanent Magnet Synchronous Machines During Integrated Charging Operation in Electric Vehicles,” International Journal of Powertrain, 2017.
  2. E. Ghosh, A. Mollaeian, S. Kim, J. Tjong, and N.C. Kar, “DNN–based Predictive Magnetic Flux Reference for Harmonic Compensation Control in Magnetically Unbalanced Induction Motor,” IEEE Transactions on Magnetics, vol. 53, no. 11, 2017.
  3. C. Lai, G. Feng, K. Mukherjee, V. Loukanov, and N.C. Kar, “Torque Ripple Minimization for Interior PMSM with Consideration of Magnetic Saturation Incorporating Online Parameter Identification,” IEEE Transactions on Magnetics, vol. 53, no. 6, 2017.
  4. G. Feng, C. Lai, and N.C. Kar, “An Analytical Solution to Optimal Stator Current Design for PMSM torque Ripple Minimization with Minimal Machine Losses,” IEEE Transactions on Industrial Electronics, vol. 64, no. 10, pp. 7655 – 7665, 2017.
  5. G. Feng, C. Lai, K. Mukherjee, and N.C. Kar, “Online PMSM Magnet Flux–linkage Estimation for Rotor Magnet Condition Monitoring Using Measured Speed Harmonics,” IEEE Transactions on Industry Applications, vol. 53, no. 3, pp. 2786 – 2794, 2017.
  6. F. Ahmed and N.C. Kar, “Analysis of End–winding Thermal Effects in a Totally Enclosed Fan–cooled Induction Motor with a Die Cast Copper Rotor,” IEEE Transactions on Industry Applications, vol. 53, no.3, pp. 3098 – 3109, 2017.
  7. M. Zhu, W. Hu, and N.C. Kar, “Torque–Ripple–Based Interior Permanent–Magnet Synchronous Machine Rotor Demagnetization Fault Detection and Current Regulation,” IEEE Transactions on Industry Applications, vol. 53, no. 3, pp. 2795 –2804, 2017.
  8. G. Feng, C. Lai, and N.C. Kar, “A Closed–Loop Fuzzy–Logic–Based Current Controller for PMSM Torque Ripple Minimization Using the Magnitude of Speed Harmonic as the Feedback Control Signal,” IEEE Transactions on Industrial Electronics, vol. 64, no. 4, pp. 2642 – 2653, 2017.
  9. M. Mousavi, A. Mollaeian, N.C. Kar, and M. Timusk, “A Novel Parallel Modelling Wavelet Based Mechanical Fault Detection Using Stator Current Signature of Induction Machine under Variable Load Conditions,” Journal of Electrical Engineering & Electronic Technology, 2017.
  10. A. Mollaeian, E. Ghosh, H. Dhulipati, J. Tjong, and N.C. Kar, “3–D Sub–domain Analytical Model to Calculate Magnetic Flux Density in Induction Machines with Semi–closed Slots Under No–load Condition,” IEEE Transactions on Magnetics, vol. 53, 2017.
  11. C. Lai, G. Feng, K.L.V. Iyer, K. Mukherjee, and N.C. Kar, “Genetic Algorithm–based Current Optimization for Torque Ripple Reduction of Interior PMSMs,” IEEE Transactions on Industry Applications, vol. 53, no. 5, pp. 4493 – 4503, 2017.
  12. C. Lai, G. Feng, K. Mukherjee, and N.C. Kar, “Investigations of the Influence of PMSM Parameter Variations in Optimal Stator Current Design for Torque Ripple Minimization,” IEEE Transactions on Energy Conversion, vol. 32, no. 3, pp. 1052 – 1062, 2017.
  13. G. Feng, C. Lai, and N.C. Kar, “Particle–Filter–Based Magnet Flux Linkage Estimation for PMSM Magnet Condition Monitoring Using Harmonics in Machine Speed,” IEEE Transactions on Industrial Informatics, vol. 13, no. 3, pp. 1280 – 1290, 2017.G. Feng, C. Lai, and N.C. Kar, “Expectation Maximization Particle Filter and Kalman Filter Based Permanent Magnet Temperature Estimation for PMSM Condition Monitoring Using High–frequency Signal Injection,” IEEE Transactions on Industrial Informatics, vol. 13, pp. 1261 – 1270, 2017.

Conference Papers:

  1. S. Mukundan, H. Dhulipati, K. L. V. Iyer, C. Lai, K. Mukherjee, and N. C. Kar, “Comparative Performance Analysis of 3-phase IPMSM Rotor Configurations with Dampers for Integrated Charging Application in EV,” Accepted for Presentation on the IEEE Conference on Industrial Electronics Society, Beijing, China, November 2017.
  2. A. Balamurali, G. Feng, C. Lai, V.Loukanov, and N. C. Kar, “Investigation into Variation of Permanent Magnet Synchronous Motor-Drive Losses for System Level Efficiency Improvement,” Accepted for Presentation on the IEEE Conference on Industrial Electronics Society, Beijing, China, November 2017.
  3. C. Lai, G. Feng, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, “Accurate Inductances and Magnet Flux Linkage Estimation in Interior PMSM Employing Speed Harmonic Measurements,” Accepted for Presentation on the IEEE Conference on Industrial Electronics Society, Beijing, China, November 2017.
  4. G. Feng, C. Lai, J. Tjong, and N. C. Kar, “Investigation of Permanent Magnet Flux Linkage Variation in PMSMs due to Temperature Rise and Magnetic Saturation,” Accepted for Presentation on the IEEE Conference on Industrial Electronics Society, Beijing, China, November 2017.
  5. P. Korta, K. L. V. Iyer, C. Lai, K. Mukherjee, J. Tjong, and N. C. Kar, “A Novel Hybrid Approach Towards Drive Cycle based Design and Optimization of a Fractional Slot Concentrated Winding Surface Permanent Magnet Machine for EVs,” accepted for presentation at the IEEE Energy Conversion Congress and Exposition, Ohio, United States, October 2017.
  6. J. Cai, C. Lai, and N. C. Kar, “Modeling and Analysis of Torque Ripple in a Brushless DC Motor Considering Spatial Harmonics,”in proc of the IEEE Canadian Conference on Electrical and Computer Engineering, May 2017.
  7. H. Dhulipati, S. Mukundan, K. L. V. Iyer, and N. C. Kar, “Skewing of Stator Windings for Reduction of Spatial Harmonics in Concentrated Wound PMSM,” in proc of the IEEE Canadian Conference on Electrical and Computer Engineering, May 2017.
  8. S. Mukundan, H. Dhulipati, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, “Comparison of Inductance Determination Methods of PMSMs for EV Application,” in proc of the IEEE Canadian Conference on Electrical and Computer Engineering, May 2017.
  9.  M. Zhu, V. Hu, J. Tjong, and N. C. Kar, “A Novel Gray System Theory Based Core Losses Estimation Method for VSI-Fed Induction Machines,” in proc of the IEEE Canadian Conference on Electrical and Computer Engineering, May 2017.
  10. Q. Xie, C. Filho, G. Feng, W. Clandfield, and N. Kar, “Advanced Vehicle Dynamic Model for EV Emulation Considering Environment Conditions”, in proc of the IEEE Canadian Conference on Electrical and Computer Engineering, May 2017.
  11. E. Ghosh, A. Mollaein, S. Kim, and N. C. Kar, “DNN Predictive Magnetic Flux Control for Harmonics Compensation in Magnetically Unbalanced Induction Motor,” in proc of the IEEE International Magnetics Conference, Ireland, April 2017.
  12. E. Zhu, V. Hu, M. Kelly, and N. C. Kar, “Permanent Magnet Flux Linkage Variation Monitoring Based on Torque Ripple Order Tracking Filtering,” in proc of the IEEE International Magnetics Conference, Ireland, April 2017.
  13. Q. Xie, E. Zhu, J. Tjong, and N. C. Kar, “Acoustic Noise Based Permanent Magnet Flux Reduction Diagnosis and Current Compensation in PMSM,” in proc of the IEEE International Magnetics Conference, Ireland, April 2017.
  14. E. Ghosh, A. Mollaein, S. Kim, and N. C. Kar, “Intelligent Flux Predictive Control through Online Stator Inter-turn Fault Detection for Fault-tolerant Control of Induction Motor,” in proc of the IEEE International Conference on Industrial Technology, Canada, March 2017.